 |
ITEM#2N154M: NO SHOW POLY MESH:
Soft and translucent Poly mesh that does not irritate against skin. A
very versatile stabilizer that is great to use on knits and children’s
clothes. Remains soft through the course of the embroidery process and
many washings.
12” x
10 yds
|
|
ITEM#2N154: NO SHOW POLY MESH:
Soft and translucent Poly mesh that does not irritate against skin. A
very versatile stabilizer that is great to use on knits and children’s
clothes. Remains soft through the course of the embroidery process and
many washings.
12” x
25 yds
|
 |
ITEM#2N154FM: NO SHOW FUSIBLE POLY
MESH: Prevents stretching during the embroidery process.
Provides a bond with heat from your iron, thereby eliminating harmful adhesive
sprays. Stabilizes and prevents unraveling of delicate fabrics. 12” x
10 yds
|
| |
ITEM#2N154FMB: NO SHOW FUSIBLE
POLY MESH: Prevents stretching during the embroidery process. Provides
a bond with heat from your iron,
thereby eliminating harmful adhesive sprays. Stabilizes and prevents unraveling
of delicate fabrics. Available in Black or
Beige, 12” x 10
yds
|
|
ITEM#2N154F: NO SHOW FUSIBLE POLY
MESH: Prevents stretching during the embroidery process.
Provides a bond with heat from your iron, thereby eliminating harmful adhesive
sprays. Stabilizes and prevents unraveling of delicate fabrics. 12” x
25 yds
|
 |
ITEM#2IOFM: LIGHT IRON ON FUSIBLE: Ideal
stabilizer for fabrics that tend to shift during the embroidery process.
To activate the glue, turn iron on low heat and press against back of fabric. 12” x
10 yds
|
|
ITEM#2IOF: LIGHT IRON ON FUSIBLE: Ideal
stabilizer for fabrics that tend to shift during the embroidery process.
To activate the glue, turn iron on low heat and press against back of fabric. 12” x
25 yds
|
| |
ITEM#2FT1: FUSIBLE TEAR AWAY: Medium
weight tear away that can be ironed onto lightweight woven fabrics to prevent
distorting of embroidery designs. 10” x
10 yds.
|
 |
ITEM#2CW150M: WET N MELT: Ideal for
lace work, stand-alone designs and paper dolls. Rinses away in cold water
by submerging in a bath of cold water. Design is all that remains once
the rinse is complete. 11.75” x 10
yds
|
|
ITEM#2CW150: WET N MELT: Ideal for
lace work, stand-alone designs and paper dolls. Rinses away in cold water
by submerging in a bath of cold water. Design is all that remains once
the rinse is complete. 11.75” x 25
yds
|
| |
ITEM#2CSW150M: STICKY WET N MELT: Similar
to Wet N Melt with the addition of a temporary adhesive on one side protected
by a piece of wax paper. Rinses away in cold water by submerging in a bath
of cold water. Design is all that remains once the rinse is complete.
11.75" x
5 yds
|
|
ITEM# 2SDM: SOLVY Light
weight Water Soluble Topping, 7" x 7" (100 PCS)
|
| |
ITEM# 2SD: SOLVY Light
weight Water Soluble Topping, 7" x 7" (500 PCS/Bundle)
|
| |
ITEM# 2S1: SOLVY Light
weight Water Soluble Topping, 10" x 110 Yds
|
| |
ITEM#
2S4MN: WATER SOLUBLE FILM Light
Weight Topping, 10" x 25 Yds
|
| |
ITEM# 2S4M: WATER
SOLUBLE FILM Light
Weight Topping, 10" x 50 Yds
|
| |
ITEM#
2S4: WATER SOLUBLE FILM Light
Weight Topping, 10" x 110 Yds
|
| |
ITEM#
2S7: AQUA FILM Medium
Weight Water Soluble which can be universally used as a Backing & Topping,
9” x 150 yds
|
| |
ITEM#
2S8: AQUA FILM Medium
Weight Water Soluble which can be universally used as a Backing & Topping,
12” x 150 yds
|
| |
ITEM#
2SD1: BADGE MASTER Heavy
Weight Water Soluble which is used as a Backing, similar to Ultra
Solvy. 15” x 2 yds
|
| |
ITEM#
2SD2: BADGE MASTER Heavy
Weight Water Soluble which is used as a Backing, similar to Ultra
Solvy. 30” x 2 yds
|
| |
ITEM# 2HA1M: MIRACLE FILM Clear
permanent topping/stabilzer that melts with the heat from your iron. Used
on fabrics that cannot get wet but will keep the pile from sinking.
10" x
10 yds
|
| |
ITEM#
2HA1: MIRACLE FILM Clear
permanent topping/stabilzer that melts with the heat from your
iron. Used on fabrics that cannot get wet but will keep the pile
from sinking.
10" x 50 yds
|
| |
ITEM#
2TWD152M: WASH AWAY Tear Away
Backing, 8" x 8" (100 PCS) Tear-Away that has unique
Wash-Away characteristics that leave the embroidery soft and free
of stabilizer
after the garment has been washed, and yet stitches remain firmly
locked. Made with compressed fibers. Garment must be agitated in
water to remove the excess stabilizer. However the fibers that
is under the stitching will remain. This is the only Tear Away
stabilizer that is consider to be a permeate stabilizer. Great
for towels!!! DO NOT USE FOR FREESTANDING LACE.
|
| |
ITEM#
2TWD152: WASH AWAY Tear Away
Backing, 8" x 8" (500 PCS/Bundle)
|
| |
ITEM#
2TW152M: WASH AWAY Tear Away
Backing, 9.5" x 25 Yds
|
| |
ITEM#
2TW152: WASH AWAY Tear Away
Backing, 19" x 25 Yds
|
| |
ITEM#
2HS1: HYDROSTICK Tear Away
Backing, 12" x 10 Yds. Water activated glue stabilizer to
eliminate hooping. Spray with water, place fabric, let dry, embroider
and
then tear away.
|
| |
ITEM#
2HS2: HYDROSTICK Tear Away
Backing, 12" x 25 Yds
|
| |
Item #2FD201M: FLAME RETARDANT TEAR-AWAY Backing
7”x10” (50
pcs) Soft, non-abrasive and slip resistant to give you greater
stability while stitching. Supports your design without adding
bulk. Easy to tear away cleanly in all directions. Excellent for
children’s clothing as it is 100% Polypropylene (Formaldehyde –free).
Washable and dry cleanable.
|
| |
ITEM# 2FD202: FLAME RETARDANT TEAR-AWAY Backing
8.0" x 8.0"(500 PCS/Bundle)
|
|
ITEM# 2P150:
PEEL & STICK TEAR-AWAY Backing
9” x 10yds Pressure sensitive backing that eliminates
the need to use spray adhesives. Great for fabrics that can’t
be hooped without having “hoop burns” or small
collar areas, like velvets, towels and embroidering on patch
blanks and baby bibs.
|
| |
ITEM# 2P151:
PEEL & STICK TEAR-AWAY Backing
18" x 25 Yds
|
| |
ITEM# 2P152:
PEEL & STICK TEAR-AWAY Backing
18" x 50 Yds
|
| |
ITEM# 2P153:
PEEL & STICK TEAR-AWAY Backing
18" x 100 Yds
|
| |
ITEM#2FW150M: FUSE IT: Creates a
permanent bond between two pieces of fabric. Great for seams. Not a stabilizer. 11.75” x
5 yds
|
| |
ITEM# 2AF1: APPLIQUE FUSE Sticky
on one side and pressure sensitive on the other, which allows for a temporary
hold on the applique fabric. Will remain permanent after the final pressing. 10" x
5 yds
|
| |
ITEM# 2TIMX: TIMTEX Fusible
on one side and can be run through the inkjet printer. Can be embroidered
directly on top of. Used for fabric bowls, purses, vases and boxes. 18" x
3 yds
|
| |
ITEM #2HSEF: HEAT
SEAL EMBLEM FILM A commercial
grade Polyamide hot-melt adhesive, for patches and emblems,
supplied as a film
on silicone release paper. Bonds all commonly used fabrics. Designed
for use with a household iron and will withstand dry cleaning and/or
a warm water wash cycle (up to 100ºF) after it has been allowed
to dry for 48 hours. Allow film to dry at least 48 hours for the
most effective use. 10”x2 yds
|